Fuckinllllllllllllllllllll wrote: Sun Nov 30, 2025 5:53 pmSorta niche, but… https://www.fazioelectric.com/merch/gwh ... dlqqq70k51mdc wrote: Sun Nov 30, 2025 5:42 pm Does anyone know offhand if low-profile, less obtrusive replacements for fender/jewel-style indicator lights exist?
I really, really hate the way those things look and I'm curious if there's like a flat LED option or anything that'll drop in the same (enormous) hole.
I've never seen anything fully flat. These seem maybe a *tad* better but not much: https://www.amplifiedparts.com/products ... amps-bulbsmdc wrote: Sun Nov 30, 2025 5:42 pm Does anyone know offhand if low-profile, less obtrusive replacements for fender/jewel-style indicator lights exist?
I really, really hate the way those things look and I'm curious if there's like a flat LED option or anything that'll drop in the same (enormous) hole.
Torlex and ScorpiTone really would go hand in hand... or fang in stinger?GuyLaCroix wrote: Sun Nov 30, 2025 11:47 pmFuckinllllllllllllllllllll wrote: Sun Nov 30, 2025 5:53 pmSorta niche, but… https://www.fazioelectric.com/merch/gwh ... dlqqq70k51mdc wrote: Sun Nov 30, 2025 5:42 pm Does anyone know offhand if low-profile, less obtrusive replacements for fender/jewel-style indicator lights exist?
I really, really hate the way those things look and I'm curious if there's like a flat LED option or anything that'll drop in the same (enormous) hole.
Siiiiick
Follow-up: I tried this yesterday, and it was pretty bleedy when I tried to pull drum stems out of the mix. I think this may be more related to the poor club acoustics and messy aesthetic of the band (kinda Boston’s version of The Fall) than the software. It took a long time to process an hour long set but I may mess with it some more after I split the 60 minute wav into smaller chunks.MoreSpaceEcho wrote: Tue Nov 25, 2025 10:18 amSteinberg's Spectralayers is on sale for $209 (reg $349) right now and that has some pretty good stem separation. So you can get the individual elements out and remix them TO SOME EXTENT. Depending on the source files, there'll be some bleed between elements (i.e. bits of drums in the guitar tracks), and in my experience if you start putting non-linear stuff (saturation/compression) on some tracks and not others you're gonna have some CRAZEE phasey side effects and be in a world of misery. So tread carefully.twelvepoint wrote: Tue Nov 25, 2025 9:25 am I have a few live rock band recordings from the early 2Ks that are a couple mics at the back of the room and into a mini disc recorder. The sound is not great but I’m wondering what 2025 level technology I could throw at it to improve things. Is this a deal where individual instruments can be separated, processed, and summed back together? What is the Taper Section up to these days with their mixing?
Just remembered you can demo that for 30 days, full functioning, so I'd just grab that and try it out.
Those are quite a bit nicer, might do the job, thank you!Dr Tony Balls wrote: Mon Dec 01, 2025 9:13 amI've never seen anything fully flat. These seem maybe a *tad* better but not much: https://www.amplifiedparts.com/products ... amps-bulbsmdc wrote: Sun Nov 30, 2025 5:42 pm Does anyone know offhand if low-profile, less obtrusive replacements for fender/jewel-style indicator lights exist?
I really, really hate the way those things look and I'm curious if there's like a flat LED option or anything that'll drop in the same (enormous) hole.
mdc wrote: Sun Nov 30, 2025 5:42 pm Does anyone know offhand if low-profile, less obtrusive replacements for fender/jewel-style indicator lights exist?
I really, really hate the way those things look and I'm curious if there's like a flat LED option or anything that'll drop in the same (enormous) hole.
That looks baller as shit BUT keep in mind that they're available in 5, 12, 24, and 28 VDC power options. A normal Fender amp lamp runs of 6.3 VAC. So you'd need to add a little rectifier circuit with a voltage regulator that taps off of some AC. Not a huge deal but requires a bit of know-how.mdc wrote: Tue Dec 02, 2025 12:33 pmmdc wrote: Sun Nov 30, 2025 5:42 pm Does anyone know offhand if low-profile, less obtrusive replacements for fender/jewel-style indicator lights exist?
I really, really hate the way those things look and I'm curious if there's like a flat LED option or anything that'll drop in the same (enormous) hole.The dialight 557 seems to be the thing. Panel mount indicator light with a 11/16" mounting hole.
I found a lot of weird Jewel options on reverb, but nothing completely smooth. still, some nifty stuffmdc wrote: Tue Dec 02, 2025 9:57 pm Indeed!
Weirdly, I can't seem to find anywhere in Canada that stocks the smooth jewels.
Users browsing this forum: No registered users and 1 guest