defendyachtrock wrote: Thu Jan 15, 2026 5:14 pm Hypothetical—let’s say I was thinking about putting concentric pots on my two T-Styles. Assuming both pots in the assembly are the same value, should the bottom pots be wired as volume or tone?

Additionally, does anyone have any experience in general using concentric pots? I know they tend to be seen a lot more on J-Basses with active pickups. Are they more of a help or a hindrance?

I had concentric pots on my weirdo 70s Tele bass. It had the original WRHB and then someone added a Jazz pickup near the bridge. The wiring was fucked, so I set it up to have two pots. 1 pot per pickup, the bottom was volume and the top was tone. Honestly, it worked out really well for that specific purpose and was a great way to get the max amount of versatility out of that bass!

benadrian wrote: Thu Jan 15, 2026 5:19 pm

defendyachtrock wrote: Thu Jan 15, 2026 5:14 pm Hypothetical—let’s say I was thinking about putting concentric pots on my two T-Styles. Assuming both pots in the assembly are the same value, should the bottom pots be wired as volume or tone?

Additionally, does anyone have any experience in general using concentric pots? I know they tend to be seen a lot more on J-Basses with active pickups. Are they more of a help or a hindrance?

I have never met a concentric pot on an instrument that I like. I have a concentric bass/treble on the active fender jazz bass that I used in Replicator. It seems okay, but it's still annoying. I keep waiting for the active preamp to die so I can put in two loud, passive J bass pickups wired to one volume knob and call it a day.

I've never had them on an instrument, but on pedals they are fiddly as fuck. OK, I don't have the nimblest of fingers but fuck a concentric knob. I inevitably end up constantly resetting them, as I've either nudged the other one by accident, or I have turned the wrong one (or have forgotten which is which). Fucking hate them. (WF:7 sausage fingers)

Hate concentric knobs. Yuk.

* BOSS MT-2 HAS ENTERED THE CHAT *

defendyachtrock wrote: Tue Jan 13, 2026 2:48 pm Dreadbox Treminator?

Perfect! I'd been lusting after their chorus/flanger last year, can't believe I didn't think they might make a tremolo! Thanks!

Pedal Builders!

The pedalpcb Chop Shop clone of the V1 Fairfield Barbershop - Is it spec'd out to take 18v the same as the real deal?




...or did it fry mine by doing so [/eyeroll]?

The only thing that would probably be prone to getting fried would be under-spec’d caps?

mdc wrote: Sun Jan 18, 2026 11:06 pm The only thing that would probably be prone to getting fried would be under-spec’d caps?

Agreed, and specifically C100, the 100µF power supply filter cap which the PedalPCB build doc specifies as a 5mm diameter. Looking at 100uF caps on Mouser the voltage rating for anything 5mm or smaller maxes out at 16V.

Ooooh that's unfortunate about the 16v thing...

Found a guy one neighbourhood over. I'll pass that on. Not a spendy fix I hope. Thanks!

LBx wrote: Mon Jan 19, 2026 5:30 pm Ooooh that's unfortunate about the 16v thing...

Found a guy one neighbourhood over. I'll pass that on. Not a spendy fix I hope. Thanks!

It ought to be very easy, and you could probably have the guy put in a higher voltage spec one so long as it fits.